If the repeater output driver is designed such that it can only drive VOLB down to 0.23*VDD, and the receiver input threshold, VILB, is designed to switch near 0.2*VDD, then the repeater output cannot ...

4. The integrated I2C isolator generates a higher low-level output of VOL* = 0.8 V at output B than the output low-level of VOL = 0.4 V created by a signal source at SDA1.

Nah. It’s about tradeoffs – for instance, I have a Pi Zero (BCM2835) project where I’m using the hardware I2C peripheral to talk with an OLED screen (400KHz, doesn’t need clock stretching ...

Using hardware I2C on an ESP32? Do you need to connect multiple I2C devices with the same address? Normally, you wouldn’t be able to do that without extra parts, but on the ESP32, [BastelBaus… ...

Sunnyvale, CA, November 3, 2009 — The SFH 5712 from OSRAM Opto Semiconductors is a low-voltage digital ambient light sensor that converts light intensity to digital signal output capable of direct I2C ...

The LTC4303 and LTC4304 two-wire bus buffers from Linear Technology solve the common problem of a stuck I2C/SMBus bus by isolating all of the bus connections on the ... If the serial data output ...

Posifa Technologies has unveiled the PAV3000 series of high-performance air velocity sensors with digital I2C output and a surface-mount footprint for thermal management and filter monitoring. The ...