If the repeater output driver is designed such that it can only drive VOLB down to 0.23*VDD, and the receiver input threshold, VILB, is designed to switch near 0.2*VDD, then the repeater output cannot ...

4. The integrated I2C isolator generates a higher low-level output of VOL* = 0.8 V at output B than the output low-level of VOL = 0.4 V created by a signal source at SDA1.

Nah. It’s about tradeoffs – for instance, I have a Pi Zero (BCM2835) project where I’m using the hardware I2C peripheral to talk with an OLED screen (400KHz, doesn’t need clock stretching ...

So when I recently came across an early 1970s HP 7041A X-Y recorder while clearing out my parents’ attic, I knew that I just ...

I2C addresses aren’t unique like MAC addresses, so, there’s way more kinds of I2C devices than there are addresses. ... just put a small series resistor inline with the SDA output, ...

Sunnyvale, CA, November 3, 2009 — The SFH 5712 from OSRAM Opto Semiconductors is a low-voltage digital ambient light sensor that converts light intensity to digital signal output capable of direct I2C ...

This design uses I2C control to adjust a regulator’s output voltage plus or minus 127 steps in 5 mV increments. Using an I2C-controlled DAC (IC2) to inject current into the feedback node of a ...

Posifa Technologies has unveiled the PAV3000 series of high-performance air velocity sensors with digital I2C output and a surface-mount footprint for thermal management and filter monitoring. The ...

SAN JOSE, Calif., Oct. 31, 2019 (GLOBE NEWSWIRE) -- Posifa Technologies today announced the new PAV3000 series of economical, high-performance air velocity sensors with digital I2C output and a ...