Figure 1. Figure 1 shows a design with three P-MOSFETs connected in series. Neglecting the voltage drop across R1, the input voltage is approximately the same as the potential at Q2’s source. Then, ...

Fig. 2. Quad SAB MOSFET is housed in a 16-pin SOIC package. *IC pins internally connected and connect to V-. Fig. 2 shows a quad package of one these the SAB MOSFETs; there are also dual MOSFET ...

Sensitive systems, such as those in aircraft, must withstand fault conditions, thereby avoiding component and system damage, because a sensor failure could cause a catastrophic event to occur. A ...

It's vital that MOSFET power-switch drivers be protected from a reverse-battery connection. A small rectifier diode can shield against reversed batteries. But that approach is generally ...

Silicon carbide (SiC) MOSFETs are increasingly used in high-power applications owing to their superior switching speeds, low on‐resistance and enhanced thermal performance. In order to achieve ...

Toshiba is aiming at battery pack protection with a 12V 20A common-drain dual n-channel mosfet. The new part is SSM14N956L and “uses Toshiba’s micro-process, in common with the already released 13.5A ...

Toshiba Releases 650V 3rd Generation SiC MOSFETs in DFN8x8 Package ... A product with a signal-source pin connected close to the FET chip. [4] As of May 2025, values measured by Toshiba.