The heart of your toilet’s functionality lies in the fill valve and the float. When either of these components isn’t doing its job, water may continuously flow. Here’s how to figure out ...

Fill valves come in two different designs — ball-and-arm (also known as "ballcock valve") and fill valve with a cylinder ...

Your toilet is always there for you. Once you know how to fix the handle, the flush valve, and the fill valve, you'll be able to help in its time of need.

A moaning toilet is likely caused by a faulty fill valve, commonly known as a ballcock or float valve. Use this guide to replace it with a new one.

Question: After we flush the toilet, when the tank is almost full, there is a noise. Noise May Be Coming From Toilet's Water Inlet Valve - Los Angeles Times News ...

Begin by making sure the float is set at a level that won’t allow water to run into the overflow pipe. ... Project: Toilet flush valve replacement. Cost: Under $20. Time: Under 1 hour.

The toilet is running because either water is running in the toilet or water is running out. You need to replace the fill valve and/or the flapper. VIEW E-EDITION. 25¢ for 3 mos.

Q: When we flush the toilet and the water fills up the tank, it makes a hissing noise; it also takes a long time for the water to fill up the tank. This is totally different from our other ...

If the float is higher than the fill valve, it’s an easy fix. Just adjust it to resolve the problem. If that doesn’t fix the issue, check the tightness of the chain.

You’re about to use the toilet but notice it has unusually low water. Or even worse, you just used and flushed your toilet only to find the water barely fills up the bowl. At this point, there ...

How to Repair a Running Toilet 1. Adjust the Float. The float arm controls the water level in your tank. If it’s set too high, water will keep running into the overflow tube.