Zaitronics Nexus RP2350 LiPo is a Raspberry Pi RP2350 board similar to the Raspberry Pi Pico 2, but with various improvements ...

Description The MCP4725 is an I2C single channel 12 bit Digital to Analog Converter (DAC). It is possible to have up to 8 MCP4725 on one I2C bus. The MCP4725 supports 100 KHz 400 KHz and 3.4 MHz bus ...

Rimer SBC block diagram Rimer SBC specifications: MCU – Microchip ATSAMD51J20A Core – Arm Cortex-M4F @ 120MHz Memory – 256KB RAM Storage – 1MB flash Storage – SD/MMC card interface, 64KB I2C EEPROM ...

It's like a shrunken version of the Arduino Leonardo as it features the same ATmega32U4 microcontroller, micro-USB port, and pinouts. It also operates at 5V and requires an external supply of 7 to ...

Another difference between the Rev3 and R4 WiFi is the number of their serial ports and I2C buses. The Rev3 has a single serial connection, shared by the USB port and the RX/TX pins.

On this bus, there’s three I2C devices – a 96×16 OLED screen at the address 0x3c, an accelerometer at 0x18, and the FUSB302B USB-PD PHY at 0x22.

The MT6701 is an easy to program magnetic rotary position sensor with a high-resolution 12-bit analog, PWM, UVW, ABZ. With SPI and I2C output is 14 bit. They should provide magnetic button ...

For example, we wish to wake up every day at 8:00 a.m. We may record this time value in EEPROM, and an alarm will sound anytime the time equals the saved value. These EEPROM chips use the I2C ...

Interfacing AT24LC64 with Nuvoton N76E003 – Circuit Diagram As we can see in the schematic below, the EEPROM is connected in the I2C line along with two pull up resistors. On the extreme left, the ...