Scrub with a non-scratch pad or aluminum foil (dull side): Foil is soft enough that it won't damage the metal but is abrasive enough to lift rust. Alternatively, you can use scouring pads like the ...

Unlike most acid-based rust removers, POR-15—short for Paint Over Rust—not only melts away rust, but also preps the metal underneath for paint by lightly etching the metal and leaving behind a ...

At DC Metals in North Highlands they turn junk into money. Would 'Evapo-Rust' work for them? They pay for scrap metal, so they deal with lots of rust. Where there's metal, rust often isn't far ...

they deal with lots of it. And where there's metal, rust often isn't far behind. "It's a dirty business, it's a rusty business," says manager Matthew Braswell. He normally gets the rust off with ...

Unlike most acid-based rust removers, POR-15–short for Paint Over Rust–not only melts away rust, but preps the metal underneath for paint by lightly etching the metal and leaving behind a zinc ...

Whether it is a hand rail, an outdoor patio chair or a mailbox, refinishing rusty metal is a straightforward project. Step 4: Completely remove rust from lightly rusted surfaces by applying a ...

In this comprehensive rust removal guide we demonstrate how to ... Price:$1.99Verdict:If you can stand the smell, we've found that a $1.99 bottle is the cheapest way to clean lightly rusted metal.

For lightly rusted metal objects, soak your scrubbing product in vinegar and then scrub the area. For heavily rusted objects, soak your scrubber for up to 24 hours.

It seemed like a good product to treat any small areas of rust or pitting where you can't get all the rust off the metal. We give it a 6 out of 10 on our arbitrary scale.

If the wheels are really rusty and the rust has pitted the metal, use "rusty-metal" primer. However, if they're only lightly rusted, buy self-etching primer instead.

Wearing goggles and gloves, spray a liberal amount of the rust-remover onto the damp metal. Apply more, if needed, so the surface stays wet until the rust comes loose. This might take 10 to 30 ...