Register for more free articles. Sign up for our newsletter to keep reading.

With the PVC pipe upright, tap the end cap on with a dead-blow hammer or mallet. Twist the end cap slightly to evenly distribute the cement, then finish tapping the cap until it is firmly seated.

But by limiting the printed parts to accessories like the face plate, handle, and caps, [Troy] reduced that time considerably. ... 7 thoughts on “ PVC Pipe Turned Portable Bluetooth Speaker ” ...

These caps are placed onto small sections of PVC pipe, which in turn connect to a four-way PVC cross connector. On the inside of the electrode cap, two washers are placed onto the screw.

Other than the PVC pipe, caps and ends, you only need a drill to create the holes. If you have a clunky shower head, this is a great DIY solution to a usually expensive replacement.

Acquire an empty 5-gallon drywall bucket, 1- and 4-inch-diameter PVC pipe, a 4-inch flat PVC end cap, pipe fittings to reduce the 4-inch diameter down to 1 inch, a 1-inch tee fitting, PVC solvent ...